Home / Products / Roofing Products / Roof Ventilation
ROOF VENTILATION
Problems associated with heat and moisture in the roof can be avoided by the installation of adequate Roof Ventilation systems. CSR Edmonds manufactures a range of quality Whirlybirds/Roof Vents for residential, commercial and industrial including:
Windmaster Roof Ventilator Whirlybird 300mm:
-
A 300 mm throat, spherical vane ventilator.
-
Two precision steel replacable bearings.
-
Available in an extensive range of colours.
-
Malleable base flashing suits most roof types.
Turbobeam Ventilator/Attic Skylight 250mm:
- Provides roof space ventilation
- Enables natural light to enter the attic space.
- Ideal for use on sheds.
- Malleable base flashing suits most roof types.
Supavent Roof Ventilator Whirlybird 250mm:
- A 250mm throat, vertical vane Roof Ventilator constructed primarily from ASA polymer.
- The ASA is UV stable and has excellent hail resistance.
- The vertical vane configuration offers greater starting torque at lower wind speeds.
- Available in 16 Colours.
Maestro 12V Mechanical Ventilator 300mm:
- A 12 Volt DC thermostat controlled powered roof ventilator.
- No electrician required for connection. The unit plugs directly into a power point.
- Very low operational noise and energy cost is less than $A7 per annum.
- The Maestro extracts 130 l/s. Best suited to situations where constant or controllable ventilation is required.
Maestro Solar Mechanical Ventilator 300mm:
- Same product as the 12 Volt DC Maestro, but with a BP solar panel attached to a roof fixing plate.
- the The unit is energised only from the solar panel, which has the benefit of increasing the unit's extraction rate with the intensity of the sun, or simply - ventilation, as you need it.
- The unit has no running costs.
Turboventura Turbine Ventilator 150mm:
- 150mm throat, vertical vane ventilator constructed primarily from ASA polymer. The ASA is UV stable and has excellent hail resistance.
- Two precision full steel bearings are located in the top and bottom of the unit.
- Suitable for use on small roof spaces.
- Malleable base plate suits installation on most roof types.
Cathedral Ceiling Ventilation System 250mm:
- Prevention of summer heat build-up in cathedral ceiling rooms.
- Constant dilution of indoor air pollutants emitted by furniture, carpets, mould and chemicals.
- Provision of some natural light.
- Open and close control to retain winter warmth.
ecoPOWER Hybrid Mechanical/Turbine Ventilator:
- EcoPOWER world’s first true hybrid ventilator, capable of operation seperately under both wind and power energy sources.
- The energy source is electronic commutating motor technology located in the top of the ventilator. This gives energy efficiency levels previous not seen from powered ventilators. The ultimate in ‘green’ technologies.
- Mechanical operation can be controlled by thermostat.
Hurricane Industrial Turbine Ventilator:
- Designed and manufactured in Australia for a harsh environment.
- Suited for Industrial, Commercial and community buildings, including schools, where its low starting torque provides ventilation for hot classrooms on virtually still days.
- Manufactured from 5005 grade aluminium.
- Tandaco Bearing System.
- 15 Year Performance Warranty.